Loctite 510 Equivalent Gasket Eliminator High Temperature Flange Sealant

1.Product Description Technology: Acrylic Chemical type: dimethacrylate ester Appearance(uncured): Opaque pink paste Components: One component-require Viscosity: High Cure Anaerobic Application Gasketing and sealing Strength Medium CNHYBOND 510 cures when confined in the absence of air between close fitting metal surfaces, this product is a general gasketing product suitable for habd dispensing or screen printing. 2.Typical Properties of Uncured Material Specifci gravity@25℃ 1.1 Viscosity ,Brookfield,HBT 25℃,mpa.s(cp): Spindle TC,speed2.5rpm,helipath: 200,000 to 750,000 3.Instant Sealing Capability Anaerobic sealants have the ability to resist low on-line test pressures while uncured,this test was performed with uncured product immediately after assembly of an annular polycarbonate sealing surface with an internal diameter of 50 mm and external diameter of 70mm Pressure Resistance ,Mpa: Induced Gap 0mm 0.02 Induced Gap 0.125mm 0.01 INDUCED Gap 0.25mm 0.01 4.Typical Performance of Cured Material Adhesive properties Cured for 1 hour@22℃ Compressive sherar strength iso 10123 Steel pins and collars(grit N/MM2 >1 Cured for 24 hours@22℃ Compressive shear strength ,iso 10123 Steel pins and collars(grit ,N/MM2 >7.5) Lap shear strength ,iso4587 Steel(grit blasted) N/MM2 5 Tensile strength , iso 6922 Steel(grit blasted) N/MM2 7.5 5.Directions for Use A. For best performance bond surfaces should be clean and free from grease B. The product is designed for close fitting flanged parts with gaps up to 0.25mm C. Apply manually as a continuous bead or by screen printing to on surface of the flanges D. Low pressures(<0.05mpa) may be used when testing to confirm a complete seal immediately after assembly and before curing E. Flanges should be tightened as soon as possible after assembly to avoid shimming 6.Storage Store in the unopened container in a dry area, and storage instruction are indicated on the label of the bottle. Optimal Storage: 2 °C to 8 °C. Storage below 2 °C or greater than 8 °C can adversely affect product properties. Material removed from containers may be contaminated during using. Do not return product to the original container. Heng ying Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.